NX1

There are 4 models of NUVE NX1 Bike Covers that fit different handlebars. Let's talk about the Drop:

NX1 D - This has Drop handlebars and fits road, race and gravel bikes up to 180cm in length. To check if it fits your bike, measure from the outer part of the rear wheel to the outer part of the front wheel.

The handlebar width for road and gravel bikes is quite standard and the cover is made with elastic which will allow stretch for larger than usual handlebars.

How to measure:

Measure from the most outer part of the rear wheel to the most outer part of the front wheel. Please note that manufacturers measurements do not always include tire measurements so it's best to check with a tape measure.

The cover also fits your bike if you have bike mudguards, panniers or racks attached to the front or rear wheels, but they may prevent a comfortable fit.

The fabric and the engineering. We have scanned and researched the market to find the best technical fabric available in the world that has the right blend of materials for protecting and extending the life of the bicycle. We have tested our fabric in internationally renowned labs for strength and resistance to the elements. It is made with dense fibres that prevent rips and tears and can withstand UV rays with protection of 50+ UPF so it wont go brittle with the sun.

It is our mission to reduce waste in the cycling industry so we’ve made this cover to last so we’re certain that its durability is second to none. 

We’ve coated the NX1 in a strong durable water repellent. The rain will literally bounce off the cover and create water beads that slide off. However, it's not waterproof, so if it’s caught in a heavy rain storm, at some point the repellent will not be enough and the water will pass. Finding the right balance of breathability and water resistance was a key part of our decision making when we designed the NX1. You can read about that more in our journal here: 

Ultimately if you’re like us Brits and you often have light-moderate rain showers, the cover will be strong enough to protect against the rain. But if you’re storing your bicycle outside permanently in heavy storms, then we wouldn’t recommend the NX1.

The NX1 is designed and engineered to be put on as easily as possible. It’s installed from the top which reduces friction with the bike components like the gears, brakes and chain. Here’s a quick 3 step guide and you can watch the installation video on the page above

Start by placing the cover over the top of the bike and pull tight around the handlebars

Pull the cover over the saddle where it will hold in place under the seat.

You can then zip the cover in place around the rear and then the front wheel.

There are 6 waterproof zip openings (3 on each side) for flexibility when locking your bicycle and allowing you to secure your bike in almost all situations. The central openings follow the line of the seat post so you can lock your rear wheel and frame to an anchor point - a railing, rack, a lamppost - wherever you want. The smaller openings are aligned to the front and rear wheels on both sides so you can lock your wheels to hoops and smaller racks, you can use them for floor, wall and ceiling racks to hang the bike at home or for extra security outdoors. Once you lock your bicycle with the cover on, through the lock holes/openings, the cover cannot be removed and is locked to the bicycle. This gives extra protection against thieves who won't be able to see your bicycle in the street.

Yes the NX1 bike cover will help reduce rust. There are many factors in play when it comes to rust - weather, damp conditions and where and how you store the bike. The NX1 will drastically reduce the chance of rust on your bike in nearly all of these situations.

The NX1 is made from breathable material so no condensation will build up inside the cover, ideal for long storage periods. It is also coated with a strong water repellent free of toxic chemicals which will keep out the rain. If you use the NX1 for storage in a garage, it will reduce the damp and mould build up on the bike and its components. So using a NX1 cover will definitely extend the life of your bicycle.

The covers are tailored for naked bikes but as they are made with stretch fabric, they can fit over mudguards and rear pannier racks, the only difference will be the look as it will follow the shape of the pannier rack.

Our NX1 cover is ultra lightweight and is 620g, you will be able to commute with it or carry it with you in your rides comfortably in a small bag wherever you go.

When we set out to make our bicycle covers, we knew we would only do it if they were sustainably made. Using non recycled materials and polluting substances for such a big material product was not an option. There’s always more we can do but here are a few things to call out.

We use materials made from recycled plastic bottles, we use strong DWR’s free from fluorocarbons. Fluorocarbons are toxic “forever chemicals” that pollute water supplies and never break down. We use non-toxic alternatives that work just as well.

We use precision technology to reduce waste. We have a 15km radius in our production chain to maintain very low carbon emissions and we’ve won prestigious design and innovation awards that include sustainability practice in their criteria.

You can read more about our sustainability practice here

Our covers should require minimal maintenance. We would recommend brushing and spot cleaning regularly to keep it in good shape.

Machine washing should be done only when really necessary and at low temperatures to retain the strong water repellency. Make sure you check which detergents or cleaning products are better to retain water repellent coatings. 

You can read more about product care in the section here.

We believe we have made the best bike covers for cyclists, with their needs at the centre, helping to extend the life of the bicycle with the most advanced technical materials that are made to last. If you’ve changed your mind after purchasing our covers, you have a 14 day right to return from the date of order. It must be unopened and in the same condition it was sent. You won’t be able to return it if you’ve opened it or used it. 

Unfortunately we cant cover the cost of the return and any returns will exclude original shipping costs and customs duties paid. You can find our returns policy here

Orders will be shipped within 48hrs of purchase excluding weekends and bank holidays. We ship from the EU and delivery times will depend on the destination but we will aim to get your order to you as quickly as possible and normally within 5-7 days.

You’ll be sent a tracking number once your order is dispatched from our logistics partners where you can follow the delivery of your parcel.

You can find our shipping policy here

Yes, all payments are made under a SSL certification to ensure top security and data protection.

We’re a young company based in the UK and therefore only take payments in GBP at the moment. You can still purchase the cover from our site and you can use an exchange calculator as a guide. Your bank will make the exchange rate that applies at the time and day of purchase. Local VAT rates apply.